12-03-2021 09:26 PM - edited 12-05-2021 03:19 AM
Since last mouth standby supervisor engine got rebooted many times.
Can some one help me to fix this issue ?
12-03-2021 10:41 PM
- Check current software version on the 4500 models, use an advisory release (upgrade) , if applicable , check if that can help.
M.
12-05-2021 09:54 PM
I already update software version to cat4500e-universalk9.SPA.03.11.05.E.152-7.E5.bin(the newest version from Cisco), but the Standby switch still reboot by itself!
12-04-2021 09:21 PM
@yangtao wrote:
44357 -rwx 2715397 Dec 3 2021 19:10:32 +00:00 crashinfo_iosd_20211203-190857-UTC 44362 -rwx 76704569 Dec 3 2021 19:10:34 +00:00 fullcore_iosd_20211203-190857-UTC 44359 -rwx 2720136 Dec 3 2021 06:25:59 +00:00 crashinfo_iosd_20211203-062425-UTC 44363 -rwx 76575238 Dec 3 2021 06:26:01 +00:00 fullcore_iosd_20211203-062425-UTC 44360 -rwx 2720470 Dec 3 2021 15:11:10 +00:00 crashinfo_iosd_20211203-150934-UTC 44361 -rwx 76619376 Dec 3 2021 15:11:12 +00:00 fullcore_iosd_20211203-150934-UTC
I want to see those crashinfo and fullcore files.
12-05-2021 03:36 AM
12-05-2021 03:46 AM
12-05-2021 03:30 PM
@yangtao wrote:
===================== Exception Data ==================== Exception in 'iosd' with Signal=SIGABRT(6) Frame Pointer=0x4AB507D0, Program Counter=0x1B954ECC Thread ID=5126: -Traceback= 1#cf8400dfe0489ab9c1678e3d6ee6474e :100000+350 :100000+350 iosd_unix:1BD03000+23830 iosd_unix:1BD03000+23FA8 :100000+350 debugflag:1C2E6000+1A600 :1F758000+166B900 :1F758000+7845008 :1F758000+7845320 :1F758000+784572C :1F758000+7882814 :1F758000+6DBD7DC :1F758000+6DBA6D0 :1F758000+6DB2808 :1F758000+16563A0 :1F758000+1657E8C :1F758000+165A408 :1F758000+165DE68 :1F758000+6168FC0 :1F758000+6169644 :1F758000+151BFFC :1F758000+151C3E4 :1F758000+151CC58 :1F758000+151CB30 Execution time: sec=0 usec=11394 ===================== log file: /mnt/pss/sup_sysmgr_reset.log ===================== <Sat Dec 4 00:05:33 2021> hap_sup_reset: Reason Code:[2] Reset Reason:Service [iosd] pid:[5126] terminated abnormally [6].
Raise a TAC Case and get them to verify if this is CSCuc71332.
12-05-2021 09:44 PM
I already update software version to cat4500e-universalk9.SPA.03.11.05.E.152-7.E5.bin,but the Standby switch still reboot by itself!
12-05-2021 09:51 PM
sh ver
ROM: 15.0(1r)SG12
JinQiao_IDC_4500X uptime is 4 weeks, 5 days, 19 hours, 14 minutes
Uptime for this control processor is 6 minutes
System returned to ROM by reload
System image file is "bootflash:cat4500e-universalk9.SPA.03.11.05.E.152-7.E5.bin"
Jawa Revision 3, Winter Revision 0x0.0x41
Last reload reason: Critical software exception
sh log
Dec 5 22:24:29.884: %C4K_REDUNDANCY-4-KEEPALIVE_WARNING: Keepalive messages from peer Supervisor are missing for 27 seconds
*Dec 5 22:24:33.208: %VSLP-3-VSLP_LMP_FAIL_REASON: Te1/1/31: Timeout (30000msec) waiting for Hello packet from peer
*Dec 5 22:24:33.208: %EC-5-UNBUNDLE: Interface TenGigabitEthernet1/1/31 left the port-channel Port-channel1
*Dec 5 22:24:33.210: %EC-5-UNBUNDLE: Interface TenGigabitEthernet2/1/31 left the port-channel Port-channel2
*Dec 5 22:24:33.239: %VSLP-3-VSLP_LMP_FAIL_REASON: Te1/1/32: Timeout (30000msec) waiting for Hello packet from peer
*Dec 5 22:24:33.239: %VSLP-2-VSL_DOWN: All VSL links went down while switch is in ACTIVE role
*Dec 5 22:24:33.240: %EC-5-UNBUNDLE: Interface TenGigabitEthernet1/1/32 left the port-channel Port-channel1
*Dec 5 22:24:33.248: %EC-5-UNBUNDLE: Interface TenGigabitEthernet2/1/32 left the port-channel Port-channel2
*Dec 5 22:24:34.118: %C4K_REDUNDANCY-3-COMMUNICATION: Communication with the peer Supervisor has been lost
*Dec 5 22:24:34.174: %EC-5-UNBUNDLE: Interface TenGigabitEthernet2/1/29 left the port-channel Port-channel5
*Dec 5 22:24:34.175: %FASTHELLO-2-FH_DOWN: Fast-Hello interface Te2/1/30 lost dual-active detection capability
*Dec 5 22:24:34.178: %EC-5-UNBUNDLE: Interface TenGigabitEthernet2/2/8 left the port-channel Port-channel3
*Dec 5 22:24:34.209: %C4K_REDUNDANCY-3-SIMPLEX_MODE: The peer Supervisor has been lost
*Dec 5 22:29:15.965: %C4K_IOSINTF-5-LMPHWSESSIONSTATE: Lmp HW session DOWN on slot 1 port 31.
*Dec 5 22:29:15.966: %C4K_IOSINTF-5-LMPHWSESSIONSTATE: Lmp HW session DOWN on slot 1 port 30.
*Dec 5 22:29:16.018: %C4K_IOSINTF-5-LMPHWSESSIONSTATE: Lmp HW session DOWN on slot 1 port 32.
*Dec 5 22:29:32.280: %FASTHELLO-2-FH_DOWN: Fast-Hello interface Te1/1/30 lost dual-active detection capability
*Dec 5 22:34:54.199: %C4K_IOSINTF-5-LMPHWSESSIONSTATE: Lmp HW session UP on slot 1 port 31.
*Dec 5 22:34:56.423: %C4K_IOSINTF-5-LMPHWSESSIONSTATE: Lmp HW session UP on slot 1 port 32.
*Dec 5 22:35:10.205: %VSLP-5-VSL_UP: Ready for control traffic
*Dec 5 22:35:13.239: %VSLP-5-RRP_ROLE_RESOLVED: Role resolved as ACTIVE by VSLP
*Dec 5 22:35:13.239: %EC-5-BUNDLE: Interface TenGigabitEthernet1/1/31 joined port-channel Port-channel1
*Dec 5 22:35:13.249: %EC-5-BUNDLE: Interface TenGigabitEthernet1/1/32 joined port-channel Port-channel1
*Dec 5 22:35:14.154: %C4K_REDUNDANCY-6-DUPLEX_MODE: The peer Supervisor has been detected
*Dec 5 22:35:54.696: %C4K_REDUNDANCY-6-MODE: ACTIVE supervisor initializing for sso mode
*Dec 5 22:35:55.177: %C4K_REDUNDANCY-3-COMMUNICATION: Communication with the peer Supervisor has been established
*Dec 5 22:35:55.231: %BUFCAP-6-SERVER_INIT: EPC SPI server init SUCCESSFUL
*Dec 5 22:35:55.231: %BUFCAP-6-CLIENT: EPC SPI client is BORN
*Dec 5 22:36:07.327: %C4K_REDUNDANCY-5-CONFIGSYNC: The config-reg has been successfully synchronized to the standby supervisor
*Dec 5 22:36:07.328: %C4K_REDUNDANCY-5-CONFIGSYNC: The startup-config has been successfully synchronized to the standby supervisor
*Dec 5 22:36:07.866: %C4K_REDUNDANCY-5-CONFIGSYNC: The private-config has been successfully synchronized to the standby supervisor
*Dec 5 22:36:08.672: %C4K_REDUNDANCY-5-CONFIGSYNC_RATELIMIT: The vlan database has been successfully synchronized to the standby supervisor
*Dec 5 22:36:47.407: %EC-5-BUNDLE: Interface TenGigabitEthernet2/1/31 joined port-channel Port-channel2
*Dec 5 22:36:47.433: %EC-5-BUNDLE: Interface TenGigabitEthernet2/1/32 joined port-channel Port-channel2
*Dec 5 22:36:51.836: %HA_CONFIG_SYNC-6-BULK_CFGSYNC_SUCCEED: Bulk Sync succeeded
*Dec 5 22:36:52.829: %RF-5-RF_TERMINAL_STATE: 1 ha_mgr: Terminal state reached for (SSO)
*Dec 5 22:36:52.075: %C4K_IOSMODPORTMAN-6-MODULEONLINE: STANDBY:Module 1 (WS-C4500X-32 S/N: JAE223601K8 Hw: 2.0) is online
*Dec 5 22:36:52.075: %C4K_IOSMODPORTMAN-6-MODULEONLINE: STANDBY:Module 2 (C4KX-NM-8 S/N: JAE22410QST Hw: 1.0) is online
*Dec 5 22:36:52.075: %C4K_IOSMODPORTMAN-6-MODULEONLINE: STANDBY:Module 11 (WS-C4500X-32 S/N: JAE22440F53 Hw: 2.0) is online
*Dec 5 22:36:52.075: %C4K_IOSMODPORTMAN-6-MODULEONLINE: STANDBY:Module 12 (C4KX-NM-8 S/N: JAE220106HY Hw: 1.0) is online
*Dec 5 22:37:00.410: %FASTHELLO-5-FH_UP: Fast-Hello interface Te1/1/30 status changed to link up
*Dec 5 22:37:00.414: %FASTHELLO-5-FH_UP: Fast-Hello interface Te2/1/30 status changed to link up
*Dec 5 22:37:00.508: %FASTHELLO-5-FH_DUAL_ACTIVE_CAP: Fast-Hello interface Te1/1/30 became dual-active detection capable
*Dec 5 22:37:00.249: %FASTHELLO-5-FH_UP: STANDBY: Fast-Hello interface Te2/1/30 status changed to link up
*Dec 5 22:37:00.418: %FASTHELLO-5-FH_UP: STANDBY: Fast-Hello interface Te1/1/30 status changed to link up
*Dec 5 22:37:00.419: %FASTHELLO-5-FH_DUAL_ACTIVE_CAP: STANDBY: Fast-Hello interface Te2/1/30 became dual-active detection capable
*Dec 5 22:37:01.417: %EC-5-BUNDLE: Interface TenGigabitEthernet2/2/8 joined port-channel Port-channel3
*Dec 5 22:37:01.435: %EC-5-BUNDLE: STANDBY:Interface TenGigabitEthernet2/2/8 joined port-channel Port-channel3
*Dec 5 22:37:03.415: %EC-5-BUNDLE: Interface TenGigabitEthernet2/1/29 joined port-channel Port-channel5
*Dec 5 22:37:03.515: %EC-5-BUNDLE: STANDBY:Interface TenGigabitEthernet2/1/29 joined port-channel Port-channel5
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide