Support for 2gig interfaces with SG350-28SFP-K9 V01

[BryanSmith5028]

I have a SG350-28SFP-K9 V01 that has all 1gig interfaces, both the SFP and the copper ports.
I have read where this model switch supports "2 Gigabit copper/SFP combo"
Is there a different version of this switch that supports 2gig interface speeds?
...or is there some secret trick to turn on support for 2gig speeds?
While I am fairly confident that my device is 1gig only, I thought it would not hurt to ask.

Bryan Smith
Fort Wayne, Indiana

[Reza Sharifi]

While I am fairly confident that my device is 1gig only,

I think you are correct. That device supports only 1Gig. There are some Cisco catalyst switches that support 1, 2.5, 5, and 10Gig but I have never seen 2Gig.

HTH

[Kasun Bandara]

there is no 2gig connections per interface. you can aggregate 2 interfaces (1 gig interfaces) using ether channel and achieve 2 gig. also there is 2.5Gbps,5Gbps,10Gbps and so on. but those speeds are supported in specific models. in SG350-28, you have only 1Gbps ports.