11-19-2010 09:09 AM - edited 03-06-2019 02:08 PM
Hi,
I have the following log on my Cisco 6513 chassis:
%SVCLC-5-FWTRUNK: Firewalled VLANs configured on trunks
I have already seen the explantaion in the post below:
https://supportforums.cisco.com/docs/DOC-4831
I don't understand what does it mean because I don't have a Firewall module running on this device ?
If anybody can help ...
Regards,
Ju
11-19-2010 09:12 AM
Can you post -
1) "sh run" from the switch
2) "sh module" from the switch
Jon
11-19-2010 09:51 AM
11-19-2010 12:29 PM
Ju
Do you have any othe 6500 switches trunked to this with the FWSM in it ?
Jon
11-19-2010 12:44 PM
No,
I have a 6513 trunked with this one, but there is no Firewall module in. The two chassis have exactly the same modules.
Ju
11-19-2010 12:49 PM
ju.mahieu wrote:
No,
I have a 6513 trunked with this one, but there is no Firewall module in. The two chassis have exactly the same modules.
Ju
Ju
And on that 6500 you have no firewall commands configured ?
If not only thing i can think of is it is getting mixed up with the ACE config lines but that does seem unlikely. I'll have a quick check in bug tool when i get a chance.
Jon
11-19-2010 12:59 PM
No, I don't have any fiewall commands configured on my two chassis ...
Very strange...
Thank you for your search
ju
09-13-2011 12:25 AM
Hey there,
would be cool to know if this problem has been solved. I´ve got the same issue here. Its a 6509 running without a FWSM but an ACE-Module. No Firewall commands configured either.
Does anyone has a solution to this?
Thanks in advance,
Patrick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide