%SVCLC-5-FWTRUNK but I don't have FWSM on my 6513 box ?

[ju.mahieu]

Hi,

I have the following log on my Cisco 6513 chassis:

%SVCLC-5-FWTRUNK: Firewalled VLANs configured on trunks

I have already seen the explantaion in the post below:

https://supportforums.cisco.com/docs/DOC-4831

I don't understand what does it mean because I don't have a Firewall module running on this device ?

If anybody can help ...

Regards,

Ju

[Jon Marshall]

Can you post -

1) "sh run" from the switch

2) "sh module" from the switch

Jon

[ju.mahieu]

Hi Jon,

You will attached the requested output.

Thank you ,

Regards

ju

[Jon Marshall]

Ju

Do you have any othe 6500 switches trunked to this with the FWSM in it ?

Jon

[ju.mahieu]

No,

I have a 6513 trunked with this one, but there is no Firewall module in. The two chassis have exactly the same modules.

Ju

[Jon Marshall]

ju.mahieu wrote:
No,
I have a 6513 trunked with this one, but there is no Firewall module in. The two chassis have exactly the same modules.
Ju

Ju

And on that 6500 you have no firewall commands configured ?

If not only thing i can think of is it is getting mixed up with the ACE config lines but that does seem unlikely. I'll have a quick check in bug tool when i get a chance.

Jon

[ju.mahieu]

No, I don't have any fiewall commands configured on my two chassis ...

Very strange...

Thank you for your search

ju

[Patrick gerhartz]

Hey there,

would be cool to know if this problem has been solved. I´ve got the same issue here. Its a 6509 running without a FWSM but an ACE-Module. No Firewall commands configured either.

Does anyone has a solution to this?

Thanks in advance,

Patrick