switch 2960s configuration for dark fiber test

[haslinifairos]

hi guys

im new in networking. we have a dark fiber testing from Side A > dark fiber > Side B . to test the fiber link , im using a switch 2960 and configure a vlan - vlan 31, and i assign 1 of the port to switchport access vlan 31. im not sure whether the switch need to configure a default gateway which is the other switch tat side B. im not able to ping to my pc either [port 2/0/1]. the fiber link which connected to the switch is port 2/0/49]

can you help me to check whether this configuration is correct ?  below is the running config. tx so much for the help.

SRO-SWITCH-TEST#sh run
Building configuration...

Current configuration : 2679 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname SRO-SWITCH-TEST
!
boot-start-marker
boot-end-marker
!
enable password 7 110A1016141D5F01072728
!
username admin privilege 15 password 7 00071A150754
!
!
no aaa new-model
clock timezone MYS 8
switch 2 provision ws-c2960s-48ts-l
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
!
!
!
vlan internal allocation policy ascending
!
ip ssh version 2
!
!
interface FastEthernet0
 no ip address
!
interface GigabitEthernet2/0/1
 switchport access vlan 31
 switchport mode access
 no mdix auto
 spanning-tree portfast
!
interface GigabitEthernet2/0/2
!
interface GigabitEthernet2/0/3
!
interface GigabitEthernet2/0/4
!
interface GigabitEthernet2/0/5
!
interface GigabitEthernet2/0/6
!
interface GigabitEthernet2/0/7
!
interface GigabitEthernet2/0/8
!
interface GigabitEthernet2/0/9
!
interface GigabitEthernet2/0/10
!
interface GigabitEthernet2/0/11
!
interface GigabitEthernet2/0/12
!
interface GigabitEthernet2/0/13
!
interface GigabitEthernet2/0/14
!
interface GigabitEthernet2/0/15
!
interface GigabitEthernet2/0/16
!
interface GigabitEthernet2/0/17
!
interface GigabitEthernet2/0/18
!
interface GigabitEthernet2/0/19
!
interface GigabitEthernet2/0/20
!
interface GigabitEthernet2/0/21
!
interface GigabitEthernet2/0/22
!
interface GigabitEthernet2/0/23
!
interface GigabitEthernet2/0/24
!
interface GigabitEthernet2/0/25
!
interface GigabitEthernet2/0/26
!
interface GigabitEthernet2/0/27
!
interface GigabitEthernet2/0/28
!
interface GigabitEthernet2/0/29
!
interface GigabitEthernet2/0/30
!
interface GigabitEthernet2/0/31
!
interface GigabitEthernet2/0/32
!
interface GigabitEthernet2/0/33
!
interface GigabitEthernet2/0/34
!
interface GigabitEthernet2/0/35
!
interface GigabitEthernet2/0/36
!
interface GigabitEthernet2/0/37
!
interface GigabitEthernet2/0/38
!
interface GigabitEthernet2/0/39
!
interface GigabitEthernet2/0/40
!
interface GigabitEthernet2/0/41
!
interface GigabitEthernet2/0/42
!
interface GigabitEthernet2/0/43
!
interface GigabitEthernet2/0/44
!
interface GigabitEthernet2/0/45
!
interface GigabitEthernet2/0/46
!
interface GigabitEthernet2/0/47
!
interface GigabitEthernet2/0/48
!
interface GigabitEthernet2/0/49
 switchport access vlan 31
 switchport mode access
 speed nonegotiate
 spanning-tree portfast
!
interface GigabitEthernet2/0/50
!
interface GigabitEthernet2/0/51
!
interface GigabitEthernet2/0/52
!
interface Vlan1
 no ip address
 shutdown
!
interface Vlan31
 description SRORO OFFICE
 ip address 192.168.31.250 255.255.255.0
!
ip http server
ip http secure-server
!
line con 0
line vty 5 15
!
end

SRO-SWITCH-TEST#

[Mark Malone · Accepted solution]

Hey config looks ok just missing default gateway locally pointing to other switch as you said

pc needs to be set with gateway of 192.168.31.250 vlan 31 and have a static ip in same range and same subnet

make sure your vlan 31 is up/up

[chhayheng · Accepted solution]

hi haslinifairos,

Case 1: If the different subnet you need to add route with each other.

Case 2: If the same subnet you need to turn off your computer firewall and make sure that both sides are the same range.

--Chhayheng--  

[haslinifairos]

Tq Chhayheng , Malone

i have configured the same subnet for both switches in Side A & Side B , and not configure any default gateway, its working at pingable each other. while at the same time, i turn off the PC firewall , its working. :)