05-03-2018 10:09 AM - edited 03-08-2019 02:53 PM
hi
i have active switch in a huge network , i faced problem with CPU always up to 60% or above sometimes ,
i trace the problem with ( sh logging ) command and ( terminal monitor ) and i have not any thing , any help please ?
#sh ver
Cisco IOS Software, C3750E Software (C3750E-IPBASEK9-M), Version 12.2(55)SE10, RELEASE SOFTWARE (fc2)
#dir flash:/
Directory of flash:/
2 -rwx 14612288 Mar 30 2011 04:32:54 +03:00 c3750e-ipbasek9-mz.122-55.SE10.bin
best regards
05-03-2018 10:26 AM
Hello,
post the output of 'show proc cpu', and if possible the entire configuration as well, since there are numerous bugs related to possible parts of the configuration...
05-03-2018 10:40 AM
05-03-2018 10:50 AM
05-03-2018 11:07 AM
05-03-2018 10:38 AM
05-03-2018 10:47 AM
05-03-2018 01:22 PM
05-05-2018 12:22 AM
05-05-2018 12:41 AM
Hello,
judging from your original post ("I have an active switch in a huge network") I would agree with the other posts, your CPU utilization is not extraordinary. If your users don't experience problems, I wouldn't worry about it.
You can check with the command 'show proc cpu history' what the utilization has been for the last 72 hours...
05-08-2018 11:13 PM
05-08-2018 11:28 PM
The screenshot is of no use because we can't identify what process(es) is/are causing the high CPU spike.
Use the command "sh proc cpu sort | ex 0.00" for better result.
05-08-2018 11:46 PM
05-08-2018 11:55 PM
05-09-2018 12:01 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide