11-19-2015 02:58 PM - edited 03-08-2019 02:46 AM
Hi...
we are implementing a switch 3850 temperature sensor monitoring and we see three sensor:
what we want to know is where are these sensor physically located so we can distinguish them.
for example: sensor 1 can monitor CPU temperature or sensor 2 can monitor intake temperature and sensor 3 outake temperature.
waiting your sooner answer.
Solved! Go to Solution.
11-20-2015 12:04 PM
Hi,
generally those sensors are intake, CPU and exhaust. You can tell the difference because the intake is always a bit cooler than the exhaust, and the CPU is hotter than both. but finally it worth noting on 3850s, there are temperature related bugs that will create problems with temperature monitoring, see
https://tools.cisco.com/quickview/bug/CSCuh55760
Regards
Please rate if its helpfull
11-20-2015 12:04 PM
Hi,
generally those sensors are intake, CPU and exhaust. You can tell the difference because the intake is always a bit cooler than the exhaust, and the CPU is hotter than both. but finally it worth noting on 3850s, there are temperature related bugs that will create problems with temperature monitoring, see
https://tools.cisco.com/quickview/bug/CSCuh55760
Regards
Please rate if its helpfull
02-21-2016 05:46 PM
Saif.
i am sorry for the delay.
thanks very much for your answer.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: