Dear All,
I am having the problem with one of my cisco 4948 series switch.
i am trying to load the IOS from rommon mode using tftp server.
but throwing below error.
rommon 13 >boot TFTPcat4500-entservices-mz10.122-53.SG2.bin
Tftp Session details are ....
Filename : cat4500-entservices-mz10.122-53.SG2.bin
IP Address : 172.21.174.53
TftpServer : 172.21.174.54
Received data packet # 10936
UNHANDLED ROMMON EXCEPTION at PC=0b000000
Vector=00000700 MSR=02021230 LR=003040f4
MCSR=00000000
CISR0=00000000 CISR1=00000000
DDR_ERR_DETECT=00000000
**********************************************************
* *
* Welcome to Rom Monitor for WS-C4948-10GE System. *
* Copyright (c) 2003-2009, by Cisco Systems, Inc. *
* All rights reserved. *
* *
**********************************************************
Rom Monitor Program Version 12.2(31r)SGA4
Supervisor: WS-C4948-10GE Chassis: WS-C4948
Hardware Revisions - Board: 8.5 CPLD Gill: 19
MAC Address : e0-5f-b9-c0-03-ff
IP Address : 172.21.174.53
Netmask : 255.255.255.0
Gateway : 172.21.174.54
TftpServer : 172.21.174.54
***** The system will autoboot in 5 seconds *****
Type control-C to prevent autobooting.
. . . . .
******** The system will autoboot now ********
config-register = 0x102
Autobooting using BOOT variable specified file.....
Could not find a valid file in BOOT environment variable.
BOOT variable can be set from IOS. To find currently set
Rom Monitor variables, please type 'set' command.
For help on choosing a boot method, type 'confreg' command.
rommon 1 >
Will someone help me how to make my switch alive.
