04-29-2008 11:31 PM - edited 03-05-2019 10:41 PM
We are panning to migrate the user authentication method from Radius server to tacacs server for Cisco switches.
Can any one please help with the procedure or documents?
04-29-2008 11:35 PM
Start with this document and if you have further questions please come back.
http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a0080094ea4.shtml
If you are migrating switches on remote sites make sure you start with a switch you can get physical access to just in case you manage to lock yourself out.
Jon
04-30-2008 12:16 AM
Hi Jon,
Thanks very much for your help,the link is verymuch usefull for me.
yes i am doing the migration remotly, in this case i can take some local assistance for physical access to switch in case if i am locked out, could you please clarify
04-30-2008 12:23 AM
Once you have a working config then you should be fine remotely updating the switches. However when you are first testing this it is possible to lock yourself out of the switch/router so if you can test your config on a spare switch. if you don't have a spare switch test your config on a switch/router that is not critical in your environment.
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide