Hello,
DHCP Scope is configured in Switch and below are the output of show interface. Added PXE boot server IP address and devices are fails to boot from PXE.
interface Vlan100
ip address 10.*.*.* 255.255.255.128
ip helper-address 10.*.*.*
ip helper-address 10.*.*.* -> [IP Address of PXE server]
no ip redirects
no ip unreachables
no ip proxy-arp
end
ip dhcp pool LAB
dns-server **** **** **** ****
domain-name contoso.com
option 66 ip 10.*.*.* [IP Address of PXE server]
option 67 ascii boot\x64\bootshim.efi
lease 0 0 30
If the device is boot from PXE and receiving the attached error message. Please correct me if there is any misconfiguration from the above command or provide correct command. So that devices can boot from PXE.
