Hi,
I am using exactly same hardware in the stack ,but sh switch command shows there is an hardware mismatch .
How to resolve it or we can ignore it ?
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48P 03.03.05SE cat3k_caa-universalk9 INSTALL
2 56 WS-C3850-48P 03.03.05SE cat3k_caa-universalk9 INSTALL
3 56 WS-C3850-48P 03.03.05SE cat3k_caa-universalk9 INSTALL
4 56 WS-C3850-48P 03.03.05SE cat3k_caa-universalk9 INSTALL
5 56 WS-C3850-48P 03.03.05SE cat3k_caa-universalk9 INSTALL
sh switch
Switch/Stack Mac Address : 8890.80 - Local Mac Address
Mac persistency wait time: Indefinite
H/W Current
Switch# Role Mac Address Priority Version State
------------------------------------------------------------
*1 Active 8890..x.x.x.x 15 V04 Ready
2 Standby 8890.8d18.x.x.x.x 14 V04 Ready
3 Member 8890.8d18.x.x.x.x 13 0 Ready
4 Member 40a6.x.x.x.x.x.x.x.x 12 V04 Ready
5 Member 8890.8d07.x.x.x.x 11 0 Ready
Thank you
