Hi all, I work for a large company, and we get our switches out of a warehouse, already our of the box, I'm looking for the screw template that comes with 3560/2960's that'll enable us to mount under some tables, any help will be great, thanks in advance.
What comes with these switches is the ear-mount and the screws which are used to mount the switch in a rack. So, you can't mount these switches under desks with the mounts they come with. You need to use a different solution for desks.
I have used the mount described in the link below under tables. Please note I did mount the Cisco provided mounting ears with the tabs towards the middle of the switch to create a better balance. I also set recessed the under desk mount to keep the patch cord connections away from the knees of those seated at the table.
Meet the Authors video - How to Troubleshoot Network Problems with Vinit Jain
(Live event – Wednesday, February 12th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Wednesday 12th, February 2020 at 10hrs PDT&nbs...
I have a pair of 3945 routers that are proving to be underpowered for the 100+ remote offices connecting to them. Fortunately I happen to have a couple of 4351 ISRs rated for significantly greater encrypted throughput. Is there any way I could upgrade the...
This article assumes you have the basic knowledge and experience with Cisco DNA Center and Identity Services Engine (ISE).Note when reading this doc the "Authentication Policy" referred to is part of Cisco DNA Center Onboarding section and ha...
Hi, The switch Cisco 2960CX-8PC-L supports PoE+, the total power budget is 124W, which means maximum 4 ports can support PoE+. Let's say the switch now has 2 PoE+ devices connected, does it mean the switch's PoE budget become 64W? Can we use th...