Switch Prompt for username and password

waqas.arshad · ‎01-10-2023

I have configured a stack of 9300 switch and no local username and password has been configured. I did not configure login local command on console.

Now i am trying to login from console and switch is asking for username and password as mentioned above i did configure any username and password. I tried default cisco/cisco and cisco/admin but its not working.

How can i resolve this issue?

line con 0
exec-timeout 60 0
logging synchronous
stopbits 1

aaa new-model
!

aaa authentication login default group RadiusServers local
aaa authorization exec default group RadiusServers local

Regards,

Arshad

marce1000 · ‎01-10-2023

- Since you prioritize RadiusServers in the aaa authentication and authorization lines : -> do you have an admin account available on Radius ?

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

waqas.arshad · ‎01-10-2023

Thank you for reply. I have recovered the password. I have also configured local login.