Switch QoS show policy-map interface question

[osw200051]

Hi all,

Could anyone can tell me why the output showed "0" packets but the "bytes output" is increasing?

Is that the queuing value so it shows "0" ?

Class-map: voice-traffic (match-any)
0 packets
Match: cos 6
0 packets, 0 bytes
5 minute rate 0 bps
Queueing

(total drops) 0
(bytes output) 74000
bandwidth 1% (100000 kbps)
queue-buffers ratio 1

Class-map: class-default (match-any)
0 packets
Match: any
Queueing

(total drops) 0
(bytes output) 5093009215
bandwidth 80% (8000000 kbps)
queue-buffers ratio 70

Thank you,

[Giuseppe Larosa]

Hello @osw200051 ,

this can be a platform limitation or a software bug

what is the switch model ?

Can you post

show version

Hope to help

Giuseppe

[osw200051]

HI,

Thanks for the reply.
The model and version is below :-)

Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 52 WS-C3650-48PD 16.3.6 CAT3K_CAA-UNIVERSALK9 INSTALL
2 52 WS-C3650-48PD 16.3.6 CAT3K_CAA-UNIVERSALK9 INSTALL
3 52 WS-C3650-48PD 16.3.6 CAT3K_CAA-UNIVERSALK9 INSTALL
4 52 WS-C3650-48PD 16.3.6 CAT3K_CAA-UNIVERSALK9 INSTALL
5 52 WS-C3650-48PD 16.3.6 CAT3K_CAA-UNIVERSALK9 INSTALL