Hello,
I have separate cisco 3750 switches one is a 48 port and one is a 24 port switch.
I have the 48 port switch setup on a vlan.
interface Vlan95
ip address 192.168.95.1 255.255.255.0
!
then i have another 24 port switch setup as
interface Vlan55
description EMS DMZ
ip address 192.168.55.254 255.255.255.0
!
I want everything on vlan 55 to be able to talk to the 95 network on switch 1...the 48 port switch.
what is the best way going about doing this.
should i create another vlan on the 24 port switch as a 95 network to be able to talk to ether other.
interface GigabitEthernet1/0/18
switchport access vlan 55
switchport mode access
thanks for the help