08-27-2010 03:02 AM - edited 03-06-2019 12:41 PM
Hi,
I have a D-Link switch connected to the "PC port" of an IP phone. It often causes the IP phone to unregister. I first thought it was BPDU Guard that err-disables the port, but with my actual config, I no longer am sure:
TNSWACCS01A1#sh run int fa1/0/13
Building configuration...
Current configuration : 250 bytes
!
interface FastEthernet1/0/13
description --- Mahmoud Chaabani ---
switchport access vlan 11
switchport mode access
switchport voice vlan 2222
priority-queue out
mls qos trust cos
spanning-tree portfast
spanning-tree bpduguard disable
end
TNSWACCS01A1#sh int statu err
TNSWACCS01A1#
TNSWACCS01A1#
any idea?
08-27-2010 04:26 AM
Why have you got a switch connected to the PC port of the phone?
08-27-2010 04:29 AM
This user has many PCs in the same vlan 11, and only one wall jack is available to him.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide