cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
845
Views
0
Helpful
2
Replies

switch traffic and ip phone

Wassim Aouadi
Level 4
Level 4

Hi,

I have a D-Link switch  connected to the "PC port" of an IP phone. It often causes the IP phone to unregister. I first thought it was BPDU Guard that err-disables the port, but with my actual config, I no longer am sure:

TNSWACCS01A1#sh run int fa1/0/13
Building configuration...

Current configuration : 250 bytes
!
interface FastEthernet1/0/13
description --- Mahmoud Chaabani ---
switchport access vlan 11
switchport mode access
switchport voice vlan 2222
priority-queue out
mls qos trust cos
spanning-tree portfast
spanning-tree bpduguard disable
end


TNSWACCS01A1#sh int statu err

TNSWACCS01A1#
TNSWACCS01A1#

any idea?

2 Replies 2

sugarpaddy
Level 1
Level 1

Why have you got a switch connected to the PC port of the phone?

This user has many PCs in the same vlan 11, and only one wall jack is available to him.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card