cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
286
Views
0
Helpful
1
Replies

Switch VLAN Issue

sushilpandita78
Level 1
Level 1

Sometimes some XP clients on VLAN1 cannot ping clients on VLAN2 and vice versa. When it occurs it can last up to about 10 minutes before it rectifies itself. VLAN's can ping all the clients in their own VLAN at that time also, but not the other VLAN. Can anyone please help me troubleshoot this issue?

config is as shown below and diagram is as attached.

ip routing

vlan 1

name "DEFAULT_VLAN"

untagged A13-A24

ip address 10.0.0.1 255.255.255.0

no untagged A1-A12

exit

vlan 2

name "VLAN2"

untagged A1-A12

ip address 10.0.1.1 255.255.255.0

exit

1 Reply 1

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello sushil,

what model is your multilayer switch ?

verify if you have EMI or SMI IOS image

I would suggest to verify network mask settings on clients and ip proxy-arp settings on switch with sh ip int vlan1, sh ip int vlan2

Hope to help

Giuseppe

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: