06-07-2015 09:41 PM - edited 03-08-2019 12:26 AM
Hello Team,
Today i got one case regarding the Router reboot. Output pasted below.
***************************************************
------------------ show version ------------------
Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRE8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)
)
GUJVODR4CCR02C7609 uptime is 44 minutes
Uptime for this control processor is 44 minutes
System returned to ROM by power cycle at 23:31:24 PDT Thu Sep 27 2007 (SP by power on)
System restarted at 07:20:12 IST Fri Jun 5 2015
System image file is "bootdisk:c7600s72033-advipservicesk9-mz.122-33.SRE8.bin"
Last reload type: Normal Reload
************************************************************************
where it's showing the Reload was normal reload.
system restarted time was 07:20:12 IST Fri Jun 5 2015
But the above line what does that mean ?,, what it signifies...
"System returned to ROM by power cycle at 23:31:24 PDT Thu Sep 27 2007 (SP by power on)" Kindly elaborate. why it's showing the previous date of 2007.
thanks
Sandeep
06-07-2015 09:50 PM
Do you have redundance Sup module on this box?
If yes the system restarted basically may be the Active Sup. (I mean to say the SUp failover might had hapen and not the complete switch reloaded at this point of time).
Can you please paste:-
show ver
show module
show redundancy
show logs
regards
Inayath
06-07-2015 10:51 PM
Hi Inayath,
thanks for the quick reply,
there is no redundant Sup.
------------------ show module ------------------
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1128UHFF
3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL13442RSZ
4 8 CEF720 8 port 10GE with DFC WS-X6708-10GE SAL1752JQMV
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1131WBNJ
6 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1330ULKX
8 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1814PPUL
9 11 7600 ES+ 76-ES+XC-20G3C JAE14530LO1
rest of the output attached.
06-07-2015 10:51 PM
It looks to me cosmetic bug.
I will share in case if I find it today.
REgards
Inayath
06-07-2015 11:07 PM
Here you go:-
Bug:- CSCeh49742
Link:
https://tools.cisco.com/bugsearch/bug/CSCeh49742/?reffering_site=dumpcr
HTH
Regards
Inayath
*Plz dont forget to rate all usefull posts.
06-07-2015 11:34 PM
Hi Inayath,
you mean to say that this is a cosmetic bug.
but already we are running a Higher release on cisco Router..
GUJVODR4CCR02C7609#show version
Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRE8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
please advise on this.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide