02-18-2009 01:31 PM - edited 03-06-2019 04:06 AM
hi folks.
I am able to login to my router VIA TACACS+ server. My username and password doesnot work with enable mode. When I do enable after login to user prompt; it just throws me "Authentication failed" message.
AAA commands used
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
I set up TACACS+ server and key as it has been working with login.
I really appreciate if any one can help in this issue.
rgrds
subharose
Solved! Go to Solution.
02-18-2009 02:09 PM
I don't have ACS server in hand right now. But I believe that you need turn on something on ACS server so that you can have TACACS+ to authenticate on enable password. Just enable all TACACS+ feature under "Interface" then go throught each feature you have under user configuration to see which one might be related to it.
02-18-2009 02:09 PM
I don't have ACS server in hand right now. But I believe that you need turn on something on ACS server so that you can have TACACS+ to authenticate on enable password. Just enable all TACACS+ feature under "Interface" then go throught each feature you have under user configuration to see which one might be related to it.
02-18-2009 02:10 PM
thanks
I will try it now.
02-18-2009 02:23 PM
thanks buddy
thumb's up for you.
02-18-2009 02:25 PM
Thanks, You are so quick. :)
02-18-2009 02:23 PM
You have it set up to use the enable secret or enable password for enable mode so you will have to use that otherwise change the second line so that the end also reads local instead of enable.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide