TestAclPermit Fail in WS-X6748-SFP

[Dmitry Stolyarov]

hello team!

i need help.

in my C6506-E installed module WS-X6748-SFP with WS-F6700-DFC3BXL

last time a see errors:

18:42:49: %DIAG-SP-6-TEST_RUNNING: Module 3: Running TestAclPermit{ID=23} ...

18:42:51: %DIAG-SP-3-TEST_FAIL: Module 3: TestAclPermit{ID=23} has failed. Error code = 0x1

23) TestAclPermit -------------------> F

Current bootup diagnostic level: minimal
        Module 3:
          Overall Diagnostic Result for Module 3 : MINOR ERROR
          Diagnostic level at card bootup: minimal
          Test results: (. = Pass, F = Fail, U = Untested)
            1) TestTransceiverIntegrity:
              Port  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16
              ----------------------------------------------------
                    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
              Port 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
              ----------------------------------------------------
                    .  .  .  .  U  .  .  .  .  .  .  .  .  .  .  .
              Port 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
              ----------------------------------------------------
                    .  .  .  .  .  .  .  .  .  U  .  .  U  U  .  .
            2) TestLoopback:
              Port  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16
              ----------------------------------------------------
                    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
              Port 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
              ----------------------------------------------------
                    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
              Port 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
              ----------------------------------------------------
                    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
            3) TestScratchRegister -------------> .
            4) TestTxPathMonitoring ------------> .
            5) TestDontLearn -------------------> U
            6) TestConditionalLearn ------------> .
            7) TestNewLearn --------------------> U
            8) TestStaticEntry -----------------> U
            9) TestIndexLearn ------------------> U
           10) TestCapture ---------------------> U
           11) TestTrap ------------------------> U
           12) TestMacNotification -------------> .
           13) TestFibDevices ------------------> .
           14) testIPv4FibShortcut -------------> .
           15) TestIPv6FibShortcut -------------> .
           16) TestL3HealthMonitoring ----------> U
           17) TestNATFibShortcut --------------> .
           18) TestMPLSFibShortcut -------------> .
           19) TestL3Capture -------------------> U
           20) TestL3VlanMet -------------------> .
           21) TestIngressSpan -----------------> .
           22) TestEgressSpan ------------------> .
           23) TestAclPermit -------------------> F
           24) TestAclDeny ---------------------> U
           25) TestQos -------------------------> .
           26) TestNetflowShortcut -------------> .
           27) TestLinecardMemory --------------> U
           28) TestEobcStressPing --------------> U
           29) TestFibTcamSSRAM ----------------> U
  23) TestAclPermit -------------------> F
                  Error code ------------------> 1 (DIAG_FAILURE)
                  Total run count -------------> 1
                  Last test execution time ----> Dec 08 2011 14:16:18
                  First test failure time -----> Dec 08 2011 14:16:18
                  Last test failure time ------> Dec 08 2011 14:16:18
                  Last test pass time ---------> n/a
                  Total failure count ---------> 1
                  Consecutive failure count ---> 1
diagnostic start module 3 test 23
Module 3: Running test(s) 23 may disrupt normal system operation
Do you want to continue? [no]: yes
Dec  9 09:46:57 172.24.0.1 155: 18:42:49: %DIAG-SP-6-TEST_RUNNING: Module 3: Running TestAclPermit{ID=23} ...
Dec  9 09:46:59 172.24.0.1 156: 18:42:51: %DIAG-SP-3-TEST_FAIL: Module 3: TestAclPermit{ID=23} has failed. Error code = 0x1

many port in WS-X6748-SFP not work

GigabitEthernet3/23 is up, line protocol is up (connected)

but i cant find mac address on port

may be a problem because of "TestAclPermit -------------------> F" ?

thanks in advance!

[Leo Laohoo]

Try reseating the blade.  Otherwise, the blade needs to be RMA-ed.

[smogra]

Would advise to set the diagnostic level to complete and then re-seat. (right now, it is on minimal which is default.)

As mentioned above, most likely reseat should resolve the issue. But if the module fails, this will indicate a hardware failure.

--Sweta

Please rate useful posts.

[Dmitry Stolyarov]

thanks for answer,

re-seat not help

[Leo Laohoo]

Thanks for the rating Dmitry.

Looks like your next move is to call Cisco TAC and give TAC the serial number of your 6500 chassis and get the blade replaced.