TFTP error - configuration backup from switch

[gopi_b4u2003]

Hi,

Can anyone adivce to resolve this issue. I am taking configuration backup from cisco 2950 switch through TFTP server. But it is getting error

%Error opening tftp:

How to resolve this issue

Thanks

[Lucien Avramov]

Post all the commands you are entering before you get this error

[Leo Laohoo]

The syntax is "copy ". So if you want to copy the switch config to the tftp server, then it's

copy flash:config.text tftp:///

Alternatively, if you want the running config then it's

copy running tftp:///

[CriscoSystems]

You might have to check your configuration to make sure the tftp-server command is configured.

tftp-server (filename)

where (filename) is the name of the configuration file you want to copy.

(please remember to rate helpful posts)