To access DataTraffic through Management Vlan

[akhlaqurrahmanansari]

Hi Guys,
I have three following vlans on Aggregation switch
1.Vlan 10 for Data
2. Vlan 20 for Printer
3. Vlan 100 for Network Management
I have an access switch which is connected to DC Core Switch.

And that Access switch have three vlans (Vlan-10,20 & 100), and my Laptop is connected to that Access Switch Vlan 100(NW Mgmt) to access and monitor the network devices.

My concern is can i access the Data services, Printer and also the NW mgmt services through the Network Management Vlan 100 ?

If I configured ASA Mgmt port as
Int Mgmt 0/0
IP add xxxx
Security Level-100
No management-only
Exit

Please suggest

[Jon Marshall]

Where are the L3 vlan interfaces (SVIs) for the vlans ie. where are the vlans routed.

It's not clear how the ASA comes into it. The only thing I can say for sure is yes if you remove the "management-only" command from the interface then traffic can be routed through that interface but how that affects your vlans is not clear.

Perhaps you could explain in more detail.

Jon