Hi All,
I am looking for help to configure Qos( interface Buffer,priority Queuing) on our 4506 SW Sup 7 E. Basically i need to mark AF41 & AF42 and increase the interface buffer for multicast traffic.
following are the IOS and License information.
============================================
IOS : cat4500e-universal.SPA.03.02.00.SG.150-2.SG.bin
License Information for 'WS-X45-SUP7-E'
License Level: entservices Type: Permanent
Next reboot license Level: entservices
===========================================
On 3750 we achived the same with the below configuration.
================================================================
mls qos srr-queue output dscp-map queue 1 threshold 1 34
mls qos srr-queue output dscp-map queue 2 threshold 1 16 18 20 22 25 32 36 38
mls qos srr-queue output dscp-map queue 2 threshold 2 24 26 48 56
mls qos srr-queue output dscp-map queue 3 threshold 1 0
mls qos srr-queue output dscp-map queue 4 threshold 1 8
mls qos srr-queue output dscp-map queue 4 threshold 3 10 12 14
mls qos queue-set output 2 threshold 1 100 100 100 400
mls qos queue-set output 2 threshold 2 70 80 50 400
mls qos queue-set output 2 threshold 3 40 60 50 100
mls qos queue-set output 2 threshold 4 40 60 50 100
mls qos queue-set output 2 buffers 60 20 10 10
mls qos
interface GigabitEthernet1/0/25
description link
no switchport
bandwidth 622000
ip address 192.168.2..2 255.255.255.252
ip pim query-interval 2
ip pim sparse-mode
ip igmp version 3
ip ospf network point-to-point
ip ospf cost 10
ip ospf hello-interval 1
ip ospf dead-interval 3
load-interval 60
srr-queue bandwidth shape 0 28 28 28
queue-set 2
priority-queue out
mls qos trust dscp
=====================================================
Pl some one send help with commands or some useful links
Thanks
