01-11-2011 09:20 AM - edited 03-06-2019 02:55 PM
Please see the attached for diagram.
My issue is that when we perform an IPerf test between two servers, somehow the traffic traverses via the firewall LAN interface ( I see the traffic on the firewall LAN interface spiking during the test)
Why isn't it that the two servers are talking to each other directly local on the switch versus going via the firewall gateway.
Am I missing anything?
01-11-2011 10:09 AM
Yes, - It is based on S.MAC and D.MAC of two servers (layer 2) such that if server 1 want to communicate with server 2, it send ARP request for the MAC address of server 2 then the server 2 will receive the ARP request and respond to it, and then both servers will communicate directly without going to Gateway.
01-11-2011 10:43 AM
Not sure if the firewall has proxy arp enabled for that LAN??
01-11-2011 10:56 AM
The drop-in configuration mode (using proxy arp in Watchguard terms) is not checked as an option on the firewall.
So what does this mean? Help me understand it.
http://www.watchguard.com/help/lss/74/UsingProxyARPToSetIPAddresses.htm
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide