Hi community,
We have a requirement on limiting traffic on a Nexus9000 Port-channel to 50Gig. And we have opened a TAC for this configuration change and TAC engineer shared below steps,
switch(config)# policy-map type queuing <name>
switch(config-pmap-que)# class type queuing c-out-q1
switch(config-pmap-c-que)# bandwidth percent 0
switch(config-pmap-c-que)# class type queuing c-out-q2
switch(config-pmap-c-que)# bandwidth percent 0
switch(config-pmap-c-que)# class type queuing c-out-q3
switch(config-pmap-c-que)# bandwidth percent 0
switch(config-pmap-c-que)# class type queuing c-out-q-default
switch(config-pmap-c-que)# bandwidth percent 100
switch(config-pmap-c-que)# shape min <value> max <value>
On the port : service-policy type queuing output <policy-name>
Can some explain more into this configurations, we are having bit of confusion.
Thanks.