Hi there,
While I am an experienced systems guy, I am relatively new to network infrstructure. I have been assigned the task of trunking VLAN between a Nexus 3048 and a Force10 S4810. This would seem easy enough but I am really having a bear of a time getting it to work. Any help is greatly appreciated. I have devices configured on VLAN 602 on both sides but they just are not talking.
NX0S 3048
interface configuration
----------------------------------
interface Ethernet1/49
switchport mode trunk
---------------------------------
VLAN configuration
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Eth1/13, Eth1/14, Eth1/15
Eth1/16, Eth1/17, Eth1/18
Eth1/19, Eth1/20, Eth1/21
Eth1/22, Eth1/23, Eth1/24
Eth1/49, Eth1/50, Eth1/51
Eth1/52
600 OOB active Eth1/49, Eth1/50, Eth1/51
Eth1/52
602 Production active Eth1/25, Eth1/26, Eth1/27
Eth1/28, Eth1/29, Eth1/30
Eth1/31, Eth1/32, Eth1/33
Eth1/34, Eth1/35, Eth1/36
Eth1/37, Eth1/38, Eth1/39
Eth1/40, Eth1/41, Eth1/42
Eth1/43, Eth1/44, Eth1/45
Eth1/46, Eth1/47, Eth1/48
Eth1/49, Eth1/50, Eth1/51
Eth1/52
604 Storage active Eth1/49, Eth1/50, Eth1/51
Eth1/52
606 ClientVPN active Eth1/49, Eth1/50, Eth1/51
Eth1/52
608 Test active Eth1/49, Eth1/50, Eth1/51
Eth1/52
610 Backup active Eth1/49, Eth1/50, Eth1/51
Eth1/52
700 Headquarters act/lshut Eth1/11, Eth1/49, Eth1/50
Eth1/51, Eth1/52
800 HOUHQ-HOUDC active Eth1/12, Eth1/49, Eth1/50
Eth1/51, Eth1/52
1000 DMZ active Eth1/1, Eth1/2, Eth1/3, Eth1/4
Eth1/5, Eth1/6, Eth1/7, Eth1/8
Eth1/9, Eth1/10, Eth1/49
Eth1/50, Eth1/51, Eth1/52
Remote SPAN VLANs
-------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- --------------- -------------------------------------------
Force10 S4810
interface configuration
--------------------------------
interface TenGigabitEthernet 0/0
no ip address
switchport
no shutdown
VLAN configuration
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P - Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
NUM Status Description Q Ports
* 1 Active U Te 0/1-2
600 Inactive T Te 0/0
602 Active T Te 0/0
U Te 0/12
604 Active T Te 0/0
U Te 0/36-47
606 Inactive T Te 0/0
608 Inactive T Te 0/0
610 Inactive T Te 0/0
700 Inactive T Te 0/0
800 Inactive T Te 0/0
1000 Inactive T Te 0/0
