02-14-2018 06:51 PM - edited 03-08-2019 01:51 PM
my trunking doesnt show at all when i do
show int trunk
but when i do show in fa1/0/5 switchport
SW1#show int fa1/0/5 switchport
Name: Fa1/0/5
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: down
Administrative Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 10 (SUPPPORT)
Trunking Native Mode VLAN: 1 (default)
Administrative Native VLAN tagging: enabled
any idea what im doing wrong ? also why is operational mode (down) in the book it says it shows up
running 3570 switch with 12.4v
thanks
02-14-2018 06:56 PM
Hi,
Is that interface connected? The interface needs to be connected to something for it to come up as trunk.
Thanks
John
02-15-2018 10:24 AM
you know what i am not gonna lie, I was thinking the same stupid freaking thing.
I was just 2 lazy to hook up my second switch in my server rack im such a idiot.
hhahahah. im going to try it let you know if that did the trick
Thanks!
02-15-2018 11:53 AM
ok so that did the trick
but it raised another question
When i put the first switch to (desirable) and the second to (desirable) there was a conflict in the VTP.
My book says that D to D a trunk will be formed.
but when I put one an auto seem to work.
my question is why didnt it work when i put the second switch on Desirable
and i recieved an DTP mismatch error?
02-15-2018 05:14 PM
Hi,
Can you post the port configuration of both switches.
Thanks
John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide