Hi All,
I need help connecting two 2960CX Series switches with SFP (GLC-BX10-U) modules using LC-LC UPC cable but not successful. The connectivity required is L2 as a trunk interface.
Appreciate your support,
Thanks,
Ahmed
Here are some details:
Switch #1:
Current configuration : 152 bytes
!
interface GigabitEthernet0/12
switchport mode trunk
speed nonegotiate
udld port aggressive
spanning-tree port-priority 240
end
Switch #2
Current configuration : 152 bytes
!
interface GigabitEthernet0/12
switchport mode trunk
speed nonegotiate
udld port aggressive
spanning-tree port-priority 240
end
show int g0/12
GigabitEthernet0/12 is down, line protocol is down (notconnect)
Hardware is Gigabit Ethernet, address is 4cbc.48ad.a98c (bia 4cbc.48ad.a98c)
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex, Auto-speed, link type is force-up, media type is 1000BaseBX10-U SFP
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
Interface IP-Address OK? Method Status Protocol
Vlan1 192.168.2.7 YES NVRAM up up
GigabitEthernet0/1 unassigned YES unset up up
GigabitEthernet0/2 unassigned YES unset down down
GigabitEthernet0/3 unassigned YES unset down down
GigabitEthernet0/4 unassigned YES unset down down
GigabitEthernet0/5 unassigned YES unset down down
GigabitEthernet0/6 unassigned YES unset down down
GigabitEthernet0/7 unassigned YES unset down down
GigabitEthernet0/8 unassigned YES unset down down
GigabitEthernet0/9 unassigned YES unset down down
GigabitEthernet0/10 unassigned YES unset down down
GigabitEthernet0/11 unassigned YES unset down down
GigabitEthernet0/12 unassigned YES unset down down
Port-channel1 unassigned YES unset down down
show ver
Cisco IOS Software, C2960CX Software (C2960CX-UNIVERSALK9-M), Version 15.2(7)E2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Sat 14-Mar-20 18:35 by prod_rel_team
ROM: Bootstrap program is C2960CX boot loader
BOOTLDR: C2960CX Boot Loader (C2960CX-HBOOT-M) Version 15.2(6r)E, RELEASE SOFTWARE (fc1)
Admin uptime is 55 minutes
System returned to ROM by power-on
System restarted at 11:11:48 UTC Mon Jun 1 2020
System image file is "flash:c2960cx-universalk9-mz.152-7.E2/c2960cx-universalk9-mz.152-7.E2.bin"
Last reload reason: Reload command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C2960CX-8PC-L (APM86XXX) processor (revision L0) with 524288K bytes of memory.
Processor board ID FOC2312Y3CH
Last reset from power-on
1 Virtual Ethernet interface
12 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 4C:BC:48:AD:A9:80
Motherboard assembly number : 73-100862-04
Power supply part number : 341-0675-02
Motherboard serial number : FOC23114XUX
Power supply serial number : LIT23012XFY
Model revision number : L0
Motherboard revision number : C0
Model number : WS-C2960CX-8PC-L
System serial number : FOC2312Y3CH
Top Assembly Part Number : 68-100568-01
Top Assembly Revision Number : E0
Version ID : V03
CLEI Code Number : CMMT410BRB
Hardware Board Revision Number : 0x09
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 12 WS-C2960CX-8PC-L 15.2(7)E2 C2960CX-UNIVERSALK9-M
Configuration register is 0xF
Admin#
