cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
466
Views
0
Helpful
2
Replies

Twingig converter & ZX SFP GBIC on 4506

vu2jjq
Level 1
Level 1

Hi,

Catalayst 4506-E with Sup6-LE is not identifying ZX SFP GBIC.

cat4500e-lanbasek9-mz.122-53.SG5.bin is the image used.  On the twingig converter

the ZX SFP GBIC is identified as either SX GBIC or LX GBIC.

How to resolve this problem.

Thank you.

Regards

2 Replies 2

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

According to the data sheet ZX is single mode:

1000BASE-ZX SFP for Long-Reach Single-Mode Fibers

The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/product_data_sheet0900aecd8033f885.html

Can you try a GLC-LH-SMD or GLC-SX-SMD?

HTH

The very same uplink is running fine on a 6509 switch. 

Sup6-LE is not identifying the GLC-ZX-SM gbic instead it show as SX GBIC.  I have upgraded ios but that did not help.

I will be trying another fiber link tomorrow just to make sure.

SX and LX GBICs are working fine on the SUP6-LE.

Thanks.

Review Cisco Networking for a $25 gift card