06-22-2015 02:46 AM - edited 03-08-2019 12:38 AM
Hi Team,
One Customer having pair of 4507R+E Switches & we facing issue while creating object-group.
As discussed with the concern the IOS up gradation Activity done recent on Saturday but the same CLI was also not tested with previous IOS image. The license level seems ok, need the suggestion on the issue we facing.
Attaching here the respective logs.
ROM: 15.1(1r)SG5
CORE-CT1-A uptime is 52 minutes
Uptime for this control processor is 54 minutes
System returned to ROM by power-on
System image file is "bootflash:cat4500es8-universalk9.SPA.03.07.00.E.152-3.E.bin"
Jawa Revision 3, RadTrooper Revision 0x0.0x41, Conan Revision 0x1B9E
License Information for 'WS-X45-SUP8-E'
License Level: entservices Type: Permanent
Next reboot license Level: entservices
CORE-CT1-A(config)#objec?
% Unrecognized command
CORE-CT1-A(config)#object-gro
CORE-CT1-A(config)#object-gro
^
% Invalid input detected at '^' marker.
CORE-CT1-A(config)#
Regards,
Ashutosh
12-08-2015 11:44 PM
We recently installed a Cat 4503E and a Sup8-E. We're running IOS-XE 3.7.2E with IPBase license.
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSALK9-M), Version 03.07.02.E RELEASE SOFTWARE (fc1)
The object-group command is available in our case:
Switch(config)#obj <-- Tab pressed at this point
Switch(config)#object-group
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide