unable to delete static route 1811w Router

[mahesh18]

Hi all,

On 1811W  Router i have OSPF running and i do not need this static route.

ip route 192.168.20.0 255.255.255.0 192.168.20.3

when i try to delete i get error

1811w#              config t

Enter configuration commands, one per line.  End with CNTL/Z.

1811w(config)#no ip route 192.168.20.0 255.255.255.0 192.168.20.3

%No matching route to delete

1811w(config)#

Need to know how can i remove this from running config?

Thanks

Mahesh

[Reza Sharifi · Accepted solution]

Hi Mahesh,

It should work.  I just tried it.

try below commands and post the output

R1(config)#ip route 192.168.20.0 255.255.255.0 192.168.20.3  

R1(config)#do sh run | sec ip route              

ip route 192.168.20.0 255.255.255.0 192.168.20.3

R1(config)#no ip route 192.168.20.0 255.255.255.0 192.168.20.3

R1(config)#do sh run | sec ip route                          

R1(config)#

[mahesh18]

Hi Reza,

Here is output

1811w#config t

Enter configuration commands, one per line.  End with CNTL/Z.

1811w(config)#ip route 192.168.20.0 255.255.255.0 192.168.20.3

1811w(config)#do sh run | sec ip route

ip route 192.168.20.0 255.255.255.0 192.168.20.3

ip route 192.168.20.0 255.255.255.0 192.168.20.3

1811w(config)#no ip route 192.168.20.0 255.255.255.0 192.168.20.3

1811w(config)#do sh run | sec ip route

1811w(config)#

but when i do sh run it is still there also

1811w#                                            sh run | sec ip route

ip route 192.168.20.0 255.255.255.0 192.168.20.3

thanks

mahesh

[Reza Sharifi · Accepted solution]

Hi Mahesh,

I am thinking, this may be a bug in the IOS you are running.

Can you repeat the commands above, save the config than issue the show command?

What is the IOS version?

HTH

Reza

[mahesh18]

Hi Reza,

I did as what you said above

still same thing i can see static route in running config

1811w#               sh run | sec ip route

ip route 192.168.20.0 255.255.255.0 192.168.20.3

1811w#sh flash

-#- --length-- -----date/time------ path

1     23673764 Oct 20 2012 13:44:06 c181x-advipservicesk9-mz.124-24.T8.bin

This is the IOS  i have.

To mee seems bug.

Thanks

Mahesh

[John Blakley · Accepted solution]

Mahesh,

I agree with Reza in that this is probably a bug that doesn't really affect anything. Do you see this route if you do a "show ip route static"?

HTH,

John

[Durga Prasad M.S · Accepted solution]

Can you post output of sh run | begin ip route.
Is the route showing up in "sh ip route"?
Rgds/ dp


Sent from Cisco Technical Support Android App

[mahesh18]

hi everyone,

I did not check earlier if route was there in sh ip route command or not.

This is what i did i restart my router then i was able to delete the static route.

Now it does not show in running config.

Today i again config the static route for testing

1811w#config t

Enter configuration commands, one per line.  End with CNTL/Z.

1811w(config)#ip route 192.168.20.0 255.255.255.0 192.168.20.3

1811w(config)#end

1811w#sh ip route static

1811w#config t

Enter configuration commands, one per line.  End with CNTL/Z.

1811w(config)#no ip route 192.168.20.0 255.255.255.0 192.168.20.3

1811w(config)#end

Now i am able to delete it as compare to yesterday.

May be rebooting the router helped.

Many thanks for everyone for their replies.

Regards

MAhesh