Hi,
Can anyone help me to figure out why on my 4506 Catalyst L3 switch i am unable to SPAN on multiple destination port on session 2, but on my 3560 switch I can do multiple destination ports? See below in red for the error
Session 1
---------
Type : Local Session
Source VLANs :
RX Only : 2034-2035
Destination Ports : Gi3/41
Encapsulation : Native
Ingress : Disabled
Learning : Disabled
Filter Pkt Type :
RX Only : Good
Session 2
---------
Type : Local Session
Source VLANs :
RX Only : 2035
Destination Ports : Gi3/48
Encapsulation : DOT1Q
Ingress : Disabled
Learning : Disabled
Filter Pkt Type :
RX Only : Good
NSEVCisco4500(config)#monitor session 2 destination int gi3/47
% This platform allows a maximum of 1 monitor destination(s)
IOS Version
==================
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.01.01.SG RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 14-Dec-10 21:30 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
Image text-base: 0x1009E914, data-base: 0x13B71550
ROM: 15.0(1r)SG2
Jawa Revision 7, Snowtrooper Revision 0x0.0x15
Directory of bootflash:/
72962 -rw- 85229120 Jun 19 2011 23:19:43 +00:00 cat4500e-universal.SPA.03.01.01.SG.150-1.XO1.bin
Thank
