Hello everyone!
I have very bad problem. I can not solve problem with update my Cisco Nexus 3064.
Before upgrade I had version: 6.7
I upgraded (installed) to nxos.7.0.3.I7.8.bin
After installing and rebooting sw, I saw:
[ 0.000000] Fastboot Memory at 0c100000 of size 2013265922.U6.7.bin....
▒Usage: init 0123POST INIT Starts at Thu Nov 14 10:51:02 UTC 2024
Starting Nexus 3000 Platform POST.....
Executing Mod 1 1 SEEPROM Test:...done (0 seconds)
Executing Mod 1 1 GigE Port Test:.done (8 seconds)
Executing Mod 1 1 PCIE Test:.................done (0 seconds)
Mod 1 1 Post Completed Successfully
POST is completed
Reconfiguring links to dev files.
.... done.
##############################################################
Boot has been interrupted or internal disk is not initialized!
##############################################################
Do you want to initialize it? (y/n)
How to repire it ?
I cant open loader mode (ctrl-c not working) :
Phase Normal Prompt (appears at the end of each phase) Recovery Prompt (appears when the system cannot progress to the next phase) Description
| BIOS | loader> | No bootable device | The BIOS begins the power-on self test, memory test, and other operating system applications. While the test is in progress, press Ctrl-C to enter the BIOS configuration utility and use the netboot option. |
