Upgrade 5672UP

[JonMoss61263]

Hi guys, i've just unboxed a 5672 running 7.3.0.N1.1.bin, and i would like to update it to the recommended 7.3.8.N1.1

As it's brand new and not in service, I was going to just change the boot variable but it threw a warning saying it's not recommended on the platform.

Any thoughts?  

[balaji.bandi · Accepted solution]

Nexus upgrade is bit different not like boot image change.

switch# show install all impact kickstart bootflash:n5600-uk9-kickstart.7.3.8.N1.1.bin system bootflash:n5600-uk9.7.3.8.N1.1.bin

here is full document for reference :

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/upgrade/738_N1_1/n5600_upgrade_downgrade_738_n1_1.html#pgfId-743204

[johnlloyd_13]

hi,

you can use the nexus USB port to transfer the image files. see helpful link:

https://wannabelab.blogspot.com/2018/07/upgrading-cisco-nexus-switch-and.html