02-26-2021 08:03 AM
Hi guys, i've just unboxed a 5672 running 7.3.0.N1.1.bin, and i would like to update it to the recommended 7.3.8.N1.1
As it's brand new and not in service, I was going to just change the boot variable but it threw a warning saying it's not recommended on the platform.
Any thoughts?
Solved! Go to Solution.
02-26-2021 08:14 AM
Nexus upgrade is bit different not like boot image change.
switch# show install all impact kickstart bootflash:n5600-uk9-kickstart.7.3.8.N1.1.bin system bootflash:n5600-uk9.7.3.8.N1.1.bin
here is full document for reference :
02-26-2021 08:14 AM
Nexus upgrade is bit different not like boot image change.
switch# show install all impact kickstart bootflash:n5600-uk9-kickstart.7.3.8.N1.1.bin system bootflash:n5600-uk9.7.3.8.N1.1.bin
here is full document for reference :
02-27-2021 05:58 PM
hi,
you can use the nexus USB port to transfer the image files. see helpful link:
https://wannabelab.blogspot.com/2018/07/upgrading-cisco-nexus-switch-and.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: