ā08-03-2010 07:50 AM - edited ā03-06-2019 12:17 PM
Hello,
I uploaded my IOS version with supervisory 6-E, version 12.2 (40) SG to a version 12.2 (53) SG2.
From what I read in the release, should also upgrade rommon version 12.2 (40r) SG1 to 12.2 (44r) SG5. In this case I don't because I have not found where is the ROMMON version.
Can I have a problem with version 12.2 (53) SG2 and ROMMON version 12.2 (40r) SG1?
Here I attached the show ver and dir all where the file is not ROMMON version.
CAT_4510#sh ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Version 12.2(40)SG, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 07-Nov-07 20:14 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x11D86AF8
ROM: 12.2(40r)SG1
Darkside Revision 4, Jawa Revision 14, Tatooine Revision 140, Forerunner Revision 1.71
CAT_4510_CP0 uptime is 5 weeks, 2 days, 16 hours, 16 minutes
Uptime for this control processor is 5 weeks, 2 days, 16 hours, 16 minutes
System returned to ROM by power-on
System image file is "bootflash:cat4500e-ipbasek9-mz.122-40.SG.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco WS-C4510R-E (MPC8548) processor (revision 6) with 524288K bytes of memory.
Processor board ID SPE114301SX
MPC8548 CPU at 1.33GHz, Supervisor 6-E
Last reset from PowerUp
35 Virtual Ethernet interfaces
256 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
CAT_4510#
CAT_4510#dir all
Directory of bootflash:/
6 -rw- 18018580 Feb 5 2008 23:43:22 +01:00 cat4500e-ipbasek9-mz.122-40.SG.bin
131436544 bytes total (108056576 bytes free)
Directory of system:/
3 dr-x 0 <no date> memory
1 -rw- 46247 <no date> running-config
2 dr-x 0 <no date> vfiles
No space information available
Directory of tmpsys:/
6 drw- 0 <no date> eem_lib_system
5 drw- 0 <no date> eem_lib_user
4 drw- 0 <no date> eem_policy
1 dr-x 0 <no date> lib
No space information available
Directory of nvram:/
500 -rw- 11091 <no date> startup-config
501 ---- 5 <no date> private-config
1 ---- 47 <no date> persistent-data
2 -rw- 0 <no date> ifIndex-table.gz
524284 bytes total (511088 bytes free)
Directory of crashinfo:/
1 -r-- 140 <no date> data
2 -r-- 0 <no date> data.bin
No space information available
Directory of cat4000_flash:/
1 -rw- 2844 <no date> vlan.dat
524284 bytes total (521440 bytes free)
Directory of profiler:/
1 -r-- 0 <no date> data
No space information available
ā08-03-2010 08:13 AM
Hi,
You should be fine with the current version you have. You don't have to have always the latest ROMMON version.
HTH
Reza
ā08-03-2010 08:19 AM
Hi ,
I see that you are still running 122-40.SG. I dont see that you have upgraded the switch to 12.2 (53) SG2.
In the release notes for sup6e the minimum and recommended ROMMON version is 12.2(44r)SG5 so I would definetely upgrade that as well.
These are the defects that you might run into with the currrent rommon version:
CSCsu05453, CSCsu36751 and CSCsu73446
You can find the ROMMON version here:
JayaKrishna
ā08-03-2010 08:31 AM
This show ver is before doing the upgrade.
My question is where is save the previous version and where i will copy the new version? I do not see the file anywhere.
In the release notes the file is in the bootflash, but in my case there does not appear.
Thank you very much.
ā08-03-2010 08:35 AM
You need to download the IOS version (12.2 (53) SG2) and ROMMON version from the Cisco website to your PC and upload them to the switch bootflash on the switch and follow the procedure to upgrade the ROMMON and IOS version.
Already running version is here and you will download the new version and rommon version here.
Directory of bootflash:/
6 -rw- 18018580 Feb 5 2008 23:43:22 +01:00 cat4500e-ipbasek9-mz.122-40.SG.bin
JayaKrishna
ā08-03-2010 05:32 PM
ROM: 12.2(40r)SG1 < --- ROMMon version
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide