cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

upgrade IOS software image on 4507R+E with dual sup6L-E

gscalia01
Beginner
Beginner

Is there any docs with step by steps on upgrading the IOS software image on 4507R+E with dual sup6L-E ?

1 ACCEPTED SOLUTION

Accepted Solutions

Ivan Shirshin
Cisco Employee
Cisco Employee

Hi!

Regular procedure should suffice:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/20ew/configuration/guide/RPR.html#wp1104060

Note that if you are upgrading from old SW, ROMMON should be upgrading beforehand:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_24727.pdf

Kind Regards,
Ivan

**Please grade this post if you find it useful.

Kind Regards,
Ivan

View solution in original post

3 REPLIES 3

Ivan Shirshin
Cisco Employee
Cisco Employee

Hi!

Regular procedure should suffice:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/20ew/configuration/guide/RPR.html#wp1104060

Note that if you are upgrading from old SW, ROMMON should be upgrading beforehand:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_24727.pdf

Kind Regards,
Ivan

**Please grade this post if you find it useful.

Kind Regards,
Ivan

gscalia01
Beginner
Beginner

Ivan,

Thanks for the info and the quick response.

welcome!

Kind Regards,
Ivan
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: