Upgrading 6506E IOS

[nguyenhuyhung84]

Hello,

I have upgraded IOS for 6506E Switch to AdvancedEnterprise edition. The IOS is located in CF memory(disk0:) but the problem is when the switch reboot, it did not boot IOS from the disk0 although I enterd the command below already:

boot system disk0:s720xx-advipservxxxxxxxxxxxxxxxx.bin

After backing up the origin IOS(in sup-bootflash) to TFTP server, I deleted it. By now, when the switch reload, it always go in rommon mode and I have to enter "boot" command manually.

Please show me the way to make the IOS in disk0: will be automatically booted in restart process.

Thank you very much !

--

Nguyen Huy Hung

[Giuseppe Larosa]

Hello Hung,

post sh ver

and

sh bootvar

Hope to help

Giuseppe

[nguyenhuyhung84]

Dear giuslar,

This is the show command result:

Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF1, R
E (fc1)

ROM: System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)
BOOTLDR: s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF1, R
E (fc1)

cisco WS-C6506-E (R7000) processor (revision 1.0) with 458720K/65536K bytes of memory.
Processor board ID SAL1003AFNK
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
cisco WS-C6506-E (R7000) processor (revision 1.0) with 458720K/65536K bytes of memory.
Processor board ID SAL1003AFNK
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
65 Virtual Ethernet/IEEE 802.3 interfaces
74 Gigabit Ethernet/IEEE 802.3 interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102

This is the show bootvar result:

BOOT variable = disk0:s72033-advipservicesk9_wan-mz.122-18.SXF1.bin,12;
CONFIG_FILE variable does not exist
BOOTLDR variable =

Configuration register is 0x2102

Thank you.