ā10-13-2012 03:00 AM - edited ā03-07-2019 09:26 AM
Hey
It would be so easy but failed to upgrade 3560X switch to ip services
licence is bought and paid for
mail and log from the CLI and tftp server attached
Can a kind and wise person say what is wrong?
Solved! Go to Solution.
ā10-13-2012 04:25 AM
Hello,
The logs from the TFTP server suggests that the TFTP server was, for whatever reason, unable to open the requested file. This may be caused by several reasons: the file is not stored in the mentioned location or has a different name; its access rights do not allow the TFTP server to read it; the filename is too long and the TFTP server is unable to process it.
I suggest double-checking if the access privileges of the license file and all directories up to the C:\ allow the TFTP server to access the file. I also recommend renaming the license file to something short, using the 8.3 convention, for example, "license.lic" - and then retry downloading it.
Please keep us informed!
Best regards,
Peter
ā10-13-2012 12:48 PM
Erik,
Hmmm... Do you have a Cisco partner that provides you with support? Definitely, this should be solved by him. He should have told you immediately that you need a universal image along with the license.
Unfortunately, I am not sure I can help further here.
Best regards,
Peter
ā10-13-2012 04:25 AM
Hello,
The logs from the TFTP server suggests that the TFTP server was, for whatever reason, unable to open the requested file. This may be caused by several reasons: the file is not stored in the mentioned location or has a different name; its access rights do not allow the TFTP server to read it; the filename is too long and the TFTP server is unable to process it.
I suggest double-checking if the access privileges of the license file and all directories up to the C:\ allow the TFTP server to access the file. I also recommend renaming the license file to something short, using the 8.3 convention, for example, "license.lic" - and then retry downloading it.
Please keep us informed!
Best regards,
Peter
ā10-13-2012 10:21 AM
Hey Peter, - it was very usefull,- it was a problem with the tftp server
I have now a problem for activating the ip services, it still start up with ip base after reload
Switch#sh license file
License Store: Primary License Storage
Store Index: 0
License: 11 ipbase 1.0 LONG NORMAL STANDALONE EXCL INFINITE_KEYS INFINITE_
KEYS NEVER NEVER NiL SLM_CODE CL_ND_LCK NiL *1WZREP7MNAFXPLG400 N
iL NiL NiL 5_MINS
/SN> NH0w2AF4IxqGy9i5WUBpfFABTCM9mqz:R1zd1fpdLIVAv3Xuku3JBw
hquYre79nQL7vA:rM41JGbgXg2Dp,eLf3SKlmQDcxxaafBqDOucAwYLOSkuMM7SXJ
3R111111111L1$
SDOSH+/0c+wbvfcTjmNR744ytZ2yhHebPkGlARtYd1UQO7GJ3KnufZ9oZ6JdFniDf
5HrQ8DrXdpCz5RgZE+y8fbN200xiXA5cB3fwcJqoPIFZm2HmD1qFfsyTAzuio66t6
Xk5y8xo1lbVhvoh/FZfy5iRY3oE=
Comment:
Hash: u7i6zThQjxd2TSI9iVTo2QPWusg=
Store Index: 1
License: 11 ipservices 1.0 LONG NORMAL STANDALONE EXCL INFINITE_KEYS INFIN
ITE_KEYS NEVER NEVER NiL SLM_CODE CL_ND_LCK NiL *1WZREP7MNAFXPLG4
00 NiL NiL NiL 5_MINS
13M jkEm4MO4zN7RTpPoecR6f5wDQhlltrXpPMeXevZ3YZfv3xeF8B
Kr8rNcoNGrjfPR3m,ezKZ8UZIc,X9LFjnTnWLDfC76LcCCt996nE8mxZpP3EFdxB1
XKvlS6h5FBbq:VU36$
RuCzEvBBgnjkG4qcEukmztB0bK5FsOuptHebPkGlARtYd1UQO7GJ3KnufZ9oZ6JdF
niDf5HrQ8DrXdpCz5RgZE+y8fbN200xiXA5cB3fwcJqoPIFZm2HmD1qFfsyTAzuio
66t6Xk5y8xo1lbVhvoh/FZfy5iRY3oE=
Comment:
Hash: DpLshBQrNq1kD/l6q8ucYofYxBw=
Switch#sh lice
Switch#sh license status
License Type Supported
permanent Non-expiring node locked license
License Operation Supported
install Install license
clear Clear license
annotate Comment license
save Save license
revoke Revoke license
call-home License call-home
Call-home Operation Supported
show pak Display license pak via call-home
install Install license via call-home
revoke Revoke license via call-home
resend Fetch license via call-home
Device status
Device Credential type: DEVICE
Device Credential Verification: PASS
Rehost Type: DC_OR_IC
SWIFT url status
Swift URL set to default value : https://tools.cisco.com/SWIFT/Licensing
Switch#
ā10-13-2012 10:33 AM
Hello,
Thank you for letting me know!
I wonder - have you actually activated the license after downloading the file? The command should be:
license install flash: filename
If you did and it did not help, can you try it again and post the output here? To be honest, I am not sure about the whitespace between the flash: and the filename - try the command both with and without it.
Best regards,
Peter
ā10-13-2012 10:39 AM
Hey Peter
Switch#license install flash:?
flash:FDO1424P13M_20121012080527015.lic flash:c3560e-ipbasek9-mz.122-55.SE3
flash:config.text flash:multiple-fs
flash:private-config.text flash:vlan.dat
Switch#license install flash:FDO1424P13M_20121012080527015.lic
Installing licenses from "flash:FDO1424P13M_20121012080527015.lic"
Installing...Feature:ipservices...Skipped:Duplicate
0/1 licenses were successfully installed
1/1 licenses were existing licenses
0/1 licenses were failed to install
Switch#
ā10-13-2012 10:46 AM
Hello,
Interesting. What do the show license all and show license feature commands say?
Best regards,
Peter
ā10-13-2012 10:52 AM
Hey Peter, - I'm glad you help
Switch#sh license all
License Store: Primary License Storage
StoreIndex: 0 Feature: ipbase Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Priority: Medium
License Count: Non-Counted
StoreIndex: 1 Feature: ipservices Version: 1.0
License Type: Permanent
License State: Active, In Use
License Priority: Medium
License Count: Non-Counted
Switch#sh lic
Switch#sh license feat
Switch#sh license feature
Feature name Enforcement Evaluation Clear Allowed Enabled
ipservices yes no yes yes
ipbase yes no yes no
lanbase no no yes no
Switch#
ā10-13-2012 10:55 AM
Hello,
According to this output, the IPServices license is installed and active. Why do you believe you are still running IPBase?
Best regards,
Peter
ā10-13-2012 11:00 AM
after reload
Switch#sh ver
Cisco IOS Software, C3560E Software (C3560E-IPBASEK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 05-May-11 15:56 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x02800000
ROM: Bootstrap program is C3560E boot loader
BOOTLDR: C3560E Boot Loader (C3560X-HBOOT-M) Version 12.2(53r)SE1, RELEASE SOFTWARE (fc1)
Switch uptime is 11 minutes
System returned to ROM by power-on
System image file is "flash:/c3560e-ipbasek9-mz.122-55.SE3/c3560e-ipbasek9-mz.122-55.SE3.bin"
ć
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
License Level: ipservices
License Type: Permanent
Next reload license Level: ipservices
cisco WS-C3560X-24 (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID FDO1424P13M
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
28 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : D4:8C:B5:7A:67:80
Motherboard assembly number : 73-12554-05
Motherboard serial number : FDO16241EMM
Model revision number : A0
Motherboard revision number : C0
Model number : WS-C3560X-24T-S
Daughterboard assembly number : 800-32786-01
Daughterboard serial number : FDO16241235
System serial number : FDO1424P13M
Top Assembly Part Number : 800-31331-02
Top Assembly Revision Number : E0
Version ID : V02
CLEI Code Number : COMJU00ARB
Hardware Board Revision Number : 0x03
ć
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 30 WS-C3560X-24 12.2(55)SE3 C3560E-IPBASEK9-M
ć
Configuration register is 0xF
Switch#
And is not able to made vrf config
Switch(config)#ip vrf VRF2796
^
% Invalid input detected at '^' marker.
Switch(config)#
Regards Erik
ā10-13-2012 11:05 AM
Hi Erik,
Umm, I think that the header of the output is confusing and that you are in fact running the IPServices already, as also confirmed by the other output here:
License Level: ipservices
License Type: Permanent
Next reload license Level: ipservices
However, it may be necessary to activate IP routing before actually implementing VRFs. Did you enter the ip routing global configuration command before trying to define VRFs?
Best regards,
Peter
ā10-13-2012 11:10 AM
Hey Peter again
I have done that
Switch(config)#ip routing
Switch(config)#ip vrf VRF2796
^
% Invalid input detected at '^' marker.
Switch(config)
regards erik
ā10-13-2012 11:18 AM
Hello Erik,
Hmmm... and what SDM template are you running? Can you try either routing or dual-ipv4-and-ipv6 default? See this document for more information.
Best regards,
Peter
ā10-13-2012 11:55 AM
Erik,
Wait. I know what's going on. You have an image that physically does not contain the IP Services features. Although it accepts licenses, it does not have the requested features built in. You need to download and install the
c3560e-universalk9-mz.122-55.SE3.bin image - that one coupled with the license you have will unlock the requested functionality.
I apologize for being so blind!
Best regards,
Peter
ā10-13-2012 12:06 PM
OK Peter, -I will try that right now
ā10-13-2012 12:23 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide