User logon

[damianrodriguez]

Hi! i create somes users with level 15 of privilege but i can only access with the admin user using ssh, telnet o http service. When i try using other users i can not access. Thank

[Federico Coto Fajardo]

Damian,

Is this an IOS router, switch?

Do you have the SSH, telnet, HTTP services authenticating against the local database?

Federico.

[damianrodriguez]

Is a switch (2960), how can i associate the users with the local database?

Thank

[Reza Sharifi]

Hi Damian,

If you create a user name without using a any authentication server it will be assassinated with a local database:

example:

username damian privilege 15 password damian123

This will give full privilege to the switch

HTH

Reza

[damianrodriguez]

OK, but my problem is that the user can not log in using ssh, telnet or http.

[Federico Coto Fajardo]

Aside from creating the internal user database, you need to check that the SSH, HTTP, telnet, ect authentication is defined

to use local authentication.

For example, for HTTP you need:

ip http authentication local

For SSH and telnet you have to reference the lines vty to local authentication as well.

Federico.

[Reza Sharifi · Accepted solution]

have you enabled telnet ssh under the vty lines:

line vty 0 4
exec-timeout 60 0
privilege level 15
password damian
login local
length 35
transport input telnet ssh

And try again.

[Ganesh Hariharan · Accepted solution]

Hi! i create somes users with level 15 of privilege but i can only
access with the admin user using ssh, telnet o http service. When i try
using other users i can not access. Thank

Hi,

Check out the below link on local database configuration for line vty ,ssh etc.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1818/products_configuration_example09186a0080204528.shtml

Hope to Help !!

Ganesh.H

Remember to rate helpful post

[damianrodriguez]

I try but the command "login local" does not exist.

I have

Ports  Model              SW Version              SW Image
WS-C2960-24TC-L    12.2(35)SE5             C2960-LANBASEK9-M

I can not add a user with the same priv than admin.

Thanks