06-18-2012 06:36 PM - edited 03-07-2019 07:19 AM
Hi,
In a new Cisco 3750, if the username and password is not configured seperately, what will be the default
username & password. I have only configured enable password.
when we access it remotely via telnet it prompts for username/password.
Thanks in advance.
Solved! Go to Solution.
06-18-2012 07:06 PM
This is no default username/password included in a switch. You will need to enter the following command.
username
Obviosuly remove the <> in username and password.
If you don't set this, the only other way you can connect is via telnet, console, and or ssh.
Under line vty you need to enter 'login' and then 'password
06-18-2012 07:06 PM
This is no default username/password included in a switch. You will need to enter the following command.
username
Obviosuly remove the <> in username and password.
If you don't set this, the only other way you can connect is via telnet, console, and or ssh.
Under line vty you need to enter 'login' and then 'password
06-18-2012 08:46 PM
You need to to enter 'local login' not just login if he is going to username and password under the vty line.
Warren
Sent from Cisco Technical Support iPhone App
06-18-2012 08:52 PM
You need to to enter 'local login' not just login if he is going to use username and password under the vty line.
Eg.
(config)#username xyz password xyz
(config)#line vty 0 15
(config)#login local
(config)#exit
Thanks,
Warren
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide