05-15-2018 12:09 AM - edited 03-08-2019 03:00 PM
Hi,
we have updated a distribution stack of Catalyst 3850 Switches from IOS XE 3.x to IOS XE 16 Fuji. After the successful update we have realised, that Flex Link Support is not included in this Releases. Bad News, because we're searching for a Switch-based (not topology-based), fast convergence link redundancy solution on L2 for the two Core-Switch Uplinks.
So the question is, whether Cisco will bring back the Feature in later Releases. In this case we could recover the IOS XE 3.x Version and wait for the Feature release. Otherwise we are searching for a solution which is equivalent. Open for any ideas (with the exception of Spanning Tree).
Thanks and Regards,
Jochen
Solved! Go to Solution.
01-05-2020 03:01 PM
01-05-2020 03:01 PM
01-06-2020 04:41 AM
Hello
Please have a look at this previous post - Here
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide