utilisation of backplane on the catalyst 6000

[NBouassiba]

Hi,

how can i check the utilisation of the backplane on C6000 ? in the catalyst are SUP1A with MSFC1 installed.

Thanks & Regards

Nouri

[amit-singh]

Which OS you are running on the switch.

Is it Hybid (CatOS+IOS) or Integrated IOS.

If you are running hybrid then use the following command:

Console> (enable) show traffic

Threshold: 100%

Traffic Peak Peak-Time

------- ---- -------------------------

0% 0% Tue Apr 25 2000, 12:07:32

Console> (enable)

Foe IOS

Show fabric utilization

HTH,

-amit singh

[NBouassiba]

Hi,

catOS& IOS are running on the switch,

the command "sh traffic" ist fine, I used on the switch,

Thanks for your help

Regards

Nouri