Hello,
I have a portchannel with two 10Gig ports. There are two VLANs in trunk in this portchannel and I would like to limit the bandwidth for the vlan as follows:
VLAN1990 - Allocated 1Gbit
VLAN1991 - Allocated 19Gbit
VLAN1990 is vlan with multicast TV service, when the other VLANs traffic is more than 19Gbit, it causes the disruption of TV service.
I tried to create the class-map with "match vlan 1990" but this command is apparently not available on C4900M, we are running:
sh ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 15.2(4)E5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Mon 18-Sep-17 09:44 by prod_rel_team
ROM: 12.2(44r)SG10
Is there any way to have the bandwidth allocated?
Thanks
