Hi Friends,
I have a cisco 3850 L3 Switch, which is installed in my network.
In that switch we created 6Vlans and each vlan having separate network (Ex..Vlan100 connected 10.4.1.0/24, Vlan200 connected 10.4.2.0/24, Vlan300 connected 10.4.3.0/24 like...) It mean to say that switch working for 6 different vlans and every vlan having individual network in the same building, we have some local servers in same vlans
My requirement is any vlan should not communicate with any other vlan, but whatever the servers are there in different vlan, those servers should reach some nodes... (Ex..Antivirus server and file server are in vlan 200, those every body should reach, Local Data Base Server are in vlan 300, those server should reach two users, who are sitting in vlan 200 and we have door access devices in all floors (each device connected to each separate vlan those devices should communicate to admin user who are in vlan 100)
Please guide me to above configuration.
Thanks & Regards,
Srinivas. N
Thanks & Regards,
Srinivas.
