cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
173
Views
0
Helpful
2
Replies

VLAN Config

anilranjan161
Beginner
Beginner

how to create VLAN in switches ?

1 Accepted Solution

Accepted Solutions

Abhishek Soni
Beginner
Beginner

Hi Anil,

 

Please provide me show version of switch.

Also you can refer the following link for the start up. Do let me know if any confusion.

 

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swvlan.html

 

 

 

View solution in original post

2 Replies 2

Hi,

 

you can entered into the configuration mode and enter below command.

 

enable

conf t

vlan X (what ever vlan you wanted)

exit .

 

HTH
Regards,
VS.Suresh.
*Plz rate the usefull posts *

Abhishek Soni
Beginner
Beginner

Hi Anil,

 

Please provide me show version of switch.

Also you can refer the following link for the start up. Do let me know if any confusion.

 

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swvlan.html

 

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: