cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
167
Views
0
Helpful
1
Replies

VLAN Connectivity Issue

farhadsultani
Level 1
Level 1

I have a VTP domain of 8 switches(cisco 3560) with 400 VLANs, on one of the switch I am getting the following log message:


%SPANTREE_VLAN_SW-2-MAX_INSTANCE: Platform limit of 128 STP instances exc

I have assigned IP address to VLAN 11 and 12 on all of the switches it works properly unless on the switch which gives the above message.

VLAN 1 is also assigned IP address on all of the switches but it works well even on the switch which gives the above message.

Please suggest me a solution to fix this issue.

Thanks in advance for your replies.

 

1 Reply 1

Dennis Mink
VIP Alumni
VIP Alumni

Depending on what switches you are using, have a look at this older post:

https://supportforums.cisco.com/discussion/11423151/catalyst-3750-having-more-128-vlans

Please rate if helpful

Please remember to rate useful posts, by clicking on the stars below.

Review Cisco Networking for a $25 gift card