cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Bookmark
|
Subscribe
|
1412
Views
0
Helpful
2
Replies

vlan error logs

Amr Hafez
Level 1
Level 1

Hi All

could anyone explain this error?

Note: I deleted the repeated lines

sh vla internal errors

 

Wed Dec  9 09:48:25.160828 2015 vlan_mgr_ascii_gen.c/print_autostate_disable_config(1701): pss fetch failed for vdc id 1 with error 1078460419.

   

 

Wed Dec  9 08:49:06.943068 2015 vlan_mgr_switchport_seq.c/vlan_mgr_build_switchport_access_event_seq_data(1123): Process Switchport Access VLAN Update Failed with

ret_code Old and new VLAN ID are the same

 

  

Wed Dec  9 08:49:00.661608 2015 vlan_mgr_notif.c/vlan_mgr_generate_update_access_memb_notif(3199): Count is 0

  

 

Wed Dec  9 08:48:03.855542 2015 vlan_mgr_port_config.c/vlan_port_get_port_mode(110): Failed to get Port mode for GigE1/1.22 with ret_code no such pss key status 0x

0

 

 

Wed Dec  9 08:48:01.62087 2015 vlan_mgr_mts.c/mts_vlan_pcm_interface_changed_notif(5754): NULL pvp_info_p

 

 

Wed Dec  9 08:36:32.966196 2015 vlan_mgr_ascii_gen.c/print_autostate_disable_config(1701): pss fetch failed for vdc id 1 with error 1078460419. 

 

Wed Dec  9 07:32:42.217615 2015 vlan_mgr_port_config.c/vlan_port_get_port_mode(110): Failed to get Port mode for  with ret_code no such pss key status 0x0  

  

 

Tue Dec  8 15:31:05.941608 2015 vlan_mgr_switchport_seq.c/vlan_mgr_build_switchport_native_event_seq_data(1370): Process Switchport Native VLAN Update Failed with

ret_code Old and new VLAN ID are the same

  

 

Tue Dec  8 15:28:20.432209 2015 vlan_mgr_port_config.c/vlan_port_get_port_mode(110): Failed to get Port mode for  with ret_code no such pss key status 0x0

   

 

Tue Dec  8 15:18:50.188987 2015 vlan_mgr_bd_sdb.c/vlan_controller_context_get(2220): [30:0] sdb_read failed, err 0x40480003 [no such pss key].

 

 

Tue Dec  8 15:17:03.499224 2015 vlan_mgr_port_config.c/vlan_port_get_port_mode(110): Failed to get Port mode for fc1/1.22 with ret_code no such pss key status 0x0

 

 

Tue Dec  8 15:17:03.250847 2015 vlan_mgr_mts.c/mts_vlan_pcm_interface_changed_notif(5754): NULL pvp_info_p

 

 

Tue Dec  8 15:00:24.549903 2015 vlan_mgr_create_seq.c/vlan_create_ev_seq_send_fn(2731): Vlan_id:4095 not in database

2 Replies 2

InayathUlla Sharieff
Cisco Employee
Cisco Employee

what device?

How did you happen to get these errors?

Did you try to deletre the vlan database and reloaded?

N9396TX with 6 port QSFP 40G

I did not try to delete vlan DB 

I connected  hp C7000 via virtual connect to both N9300 using vPC member port and 802.1Q and 802.3ad

the topology described here in details and note that :

the problem here solved for CUCM but still with hp blade C7000

https://supportforums.cisco.com/discussion/12721711/native-vlan-traffic-problem-using-nexus-9300

I follow the documentation below that describe the best practice for hp virtual connect connected to NX-SW using vPC

http://community.hpe.com/hpeb/attachments/hpeb/bladescategory04/559/1/VC_Flex10_Nexus_vPC_Setup.pdf