07-02-2008 03:48 AM - edited 03-05-2019 11:57 PM
Dear all
i want to Create 7 VLAN to seprate the network, now every vlan will use defrent subnet id from the others.
now my question is is there a way to connect the 7 VLAN to internet using ADSL Router
and Please Tell Me what i need to do that.
Note: i have one internet connection and the IP address is Dynamic from the ISP.
Thank You All
Solved! Go to Solution.
07-02-2008 04:07 AM
ok, you need to create 8 vlans, the first 7 are for what you have mentioned above, also dont forget to create the interface vlan x, interface y etc, and then assign it an ip address from the subnet, this will be the clients default gateway address.
Next, create the 8th vlan, vlan 200 or whatever, and give it an ip address of your choosing or from the default subnet that is assigned to the adsl router, say for example the adsl router has a default ethernet address of 192.168.1.1 then you could creat vlan 200 (vlan number can by anything) and assign it ip address 192.168.1.254, then configure the adsl router with the static routes to route to your interlan vlans (1-7) via the vlan ip address.
Finally on the switch, enable ip routing, and ceate a default static route 0.0.0.0 0.0.0.0 192.168.1.1 (or whatever address the adsl ethernet has)
That should be you!
HTH,
PS. Dont forget to config DNS server on clients or they wont be able to browse.
LR
07-02-2008 04:06 AM
Hi
can you revert back on the router model you are using out there ?
Ideally you can terminated all the VLAN's onto the router and create subinterfaces for each respective VLAN's.
Once you are done up with that you can have PAT configured on your router with overload onto your WAN interface which will be your outside interface.
regds
07-02-2008 04:42 AM
Dear Spremkumar
thank you for the POST but i want to tell you somthing! im not a pro in VLAN and Cisco Devices, after 21 days i will take a CCNA Course to improve my self in that subject.
now my boss asked me to create a 7 vlan's and connect the VLAN's to the internet.
i know how to create the VLAN's but i dont now how to connect the VLAN's to the internet
should i use ADSL Router and let it work as NAT Service or Should i buy a Managed Cisco Router and how i can do it?
thank you
Note:Please dont laugh on me Hahahahhahah?
07-02-2008 04:07 AM
ok, you need to create 8 vlans, the first 7 are for what you have mentioned above, also dont forget to create the interface vlan x, interface y etc, and then assign it an ip address from the subnet, this will be the clients default gateway address.
Next, create the 8th vlan, vlan 200 or whatever, and give it an ip address of your choosing or from the default subnet that is assigned to the adsl router, say for example the adsl router has a default ethernet address of 192.168.1.1 then you could creat vlan 200 (vlan number can by anything) and assign it ip address 192.168.1.254, then configure the adsl router with the static routes to route to your interlan vlans (1-7) via the vlan ip address.
Finally on the switch, enable ip routing, and ceate a default static route 0.0.0.0 0.0.0.0 192.168.1.1 (or whatever address the adsl ethernet has)
That should be you!
HTH,
PS. Dont forget to config DNS server on clients or they wont be able to browse.
LR
07-02-2008 05:09 AM
WoW thats REALLY Helps Me thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide